Liên hệ
Chúng tôi là nhà phân phối chính thức và duy nhất các sản phẩm của Miki Pulley tại thị trường Việt Nam, Quý khách có nhu cầu về các sản phẩm của Miki Pulley vui lòng liên hệ trực tiếp với chúng tôi để được tư vấn nhanh hơn.
Hotline: 0974190088/Zalo
Email: vuonguoc@gmail.com
ZG Models
[Specifications]
Model | Torque | Misalignment | Max. rotation speed [min-1] | Torsional stiffness [N・m/rad] | Moment of inertia [kg・m2] | Mass [kg] | |||
---|---|---|---|---|---|---|---|---|---|
Nominal [N・m] | Max. [N・m] | Parallel [mm] | Angular [°] | Axial [mm] | |||||
ZG-6 | 0.15 | 0.3 | 0.5 | 5 | ±0.5 | 3000 | 0.17 | 1.95×10-7 | 0.020 |
ZG-8 | 0.5 | 1.0 | 1.0 | 8 | ±1.0 | 3000 | 0.48 | 1.02×10-6 | 0.070 |
ZG-14 | 1.5 | 3.0 | 1.2 | 8 | ±1.0 | 3000 | 1.70 | 1.15×10-5 | 0.130 |
*Max. rotation speed does not take into account dynamic balance.
*The moment of inertia and mass are measured for the maximum bore diameter.
[Dimensions]
Model | d1, d2 | D | L | L1 | F | M | ||
---|---|---|---|---|---|---|---|---|
Pilot bore | Min. | Max. | ||||||
ZG-6 | 2 | 3 | 6 | 12 | 25 | 9 | 2.4 | M3 |
ZG-8 | 3 | 4 | 8 | 16 | 35 | 12.5 | 3.5 | M4 |
ZG-14 | 6 | 7 | 14 | 26 | 50 | 17 | 4.5 | M5 |
*Pilot bores are to be drilled into the part.
*Left and right tap positions may be shifted slightly.
[Standard bore diameter]
Model | Standard bore diameter d1, d2 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 4 | 5 | 6 | 6.35 | 7 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | |
ZG-6 | ● | ● | ● | ● | |||||||||
ZG-8 | ● | ● | ● | ● | ● | ● | |||||||
ZG-14 | ● | ● | ● | ● | ● | ● | ● | ● |
*Standard bore-drilled products do not have keyways. Keyways may be possible under some conditions. Contact Miki Pulley for details.
LM Models
[Specifications]
Model | Torque | Misalignment | Max. rotation speed [min-1] | Torsional stiffness [N・m/rad] | Moment of inertia [kg・m2] | Mass [kg] | |||
---|---|---|---|---|---|---|---|---|---|
Nominal [N・m] | Max. [N・m] | Parallel [mm] | Angular [°] | Axial [mm] | |||||
LM-6 | 0.5 | 1.0 | 1.0 | 8 | ±1.0 | 6000 | 0.77 | 5.10×10-7 | 0.020 |
LM-6-1 | 0.5 | 1.0 | 3.0 | 14 | ±1.5 | 6000 | 0.40 | 7.65×10-7 | 0.030 |
LM-9 | 1.0 | 2.0 | 2.5 | 8 | ±1.0 | 6000 | 1.55 | 2.55×10-6 | 0.050 |
LM-9-1 | 1.0 | 2.0 | 4.0 | 14 | ±1.5 | 6000 | 0.80 | 3.06×10-6 | 0.060 |
LM-14 | 2.0 | 4.0 | 3.0 | 8 | ±1.0 | 6000 | 3.10 | 7.65×10-6 | 0.090 |
LM-14-1 | 2.0 | 4.0 | 4.5 | 14 | ±1.5 | 6000 | 1.60 | 9.44×10-6 | 0.110 |
*Max. rotation speed does not take into account dynamic balance.
*The moment of inertia and mass are measured for the maximum bore diameter.
[Dimensions]
Model | d1, d2 | D | L | L1 | L2 | F | M | ||
---|---|---|---|---|---|---|---|---|---|
Pilot bore | Min. | Max. | |||||||
LM-6 | 4 | 5 | 6 | 14 | 35 | 12 | 6.5 | 3.5 | M4 |
LM-6-1 | 4 | 5 | 6 | 14 | 50 | 12 | 6.5 | 3.5 | M4 |
LM-9 | 5 | 6 | 9 | 20 | 40 | 14 | 7.5 | 4 | M4 |
LM-9-1 | 5 | 6 | 9 | 20 | 60 | 14 | 7.5 | 4 | M4 |
LM-14 | 8 | 9 | 14 | 26 | 50 | 17 | 10 | 5 | M5 |
LM-14-1 | 8 | 9 | 14 | 26 | 70 | 17 | 10 | 5 | M5 |
*Pilot bores are to be drilled into the part.
*The left and right tap positions are not correlated as shown in the diagram.
[Standard bore diameter]
Model | Standard bore diameter d1, d2 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
5 | 6 | 6.35 | 7 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | |
LM-6(-1) | ● | ● | |||||||||
LM-9(-1) | ● | ● | ● | ● | ● | ||||||
LM-14(-1) | ● | ● | ● | ● | ● | ● |
*Standard bore-drilled products do not have keyways. Keyways may be possible under some conditions. Contact Miki Pulley for details.
[Standard Hole-drilling Standards]
ZG/LM Models, ZG/LM Models, ZG/LM Models, ZG/LM Models, ZG/LM Models, ZG/LM Models
/5
Dựa trên đánh giá
Đánh giá
Chưa có đánh giá nào.