Liên hệ
Chúng tôi là nhà phân phối chính thức và duy nhất các sản phẩm của Miki Pulley tại thị trường Việt Nam, Quý khách có nhu cầu về các sản phẩm của Miki Pulley vui lòng liên hệ trực tiếp với chúng tôi để được tư vấn nhanh hơn.
Hotline: 0974190088/Zalo
Email: vuonguoc@gmail.com
CPE Models
CPE Models
[Specifications]
Model | Torque | Misalignment | Max. rotation speed [min-1] | Torsional stiffness [N・m/rad] | Moment of inertia [kg・m2] | Mass [kg] | ||
---|---|---|---|---|---|---|---|---|
Nominal [N・m] | Max. [N・m] | Parallel [mm] | Angular [°] | |||||
CPE-19 | 0.7 | 1.4 | 0.2 | 1 | 6000 | 500 | 0.69×10-6 | 0.015 |
CPE-29 | 2 | 4 | 0.2 | 1 | 6000 | 700 | 5.80×10-6 | 0.050 |
CPE-39 | 5 | 10 | 0.2 | 1 | 6000 | 1900 | 18.50×10-6 | 0.080 |
*Torques for CPE-19 are values when the bore diameter is at least equal to 4 mm.
*Max. rotation speed does not take into account dynamic balance.
*The moment of inertia and mass are measured for the maximum bore diameter.
[Dimensions]
Model | d1, d2 | D | L | L1 | L2 | M | A | |
---|---|---|---|---|---|---|---|---|
Min. | Max. | |||||||
CPE-19 | 3 | 8 | 19 | 19.4 | 6 | 2.75 | M2.5 | 6 |
CPE-29 | 6 | 14 | 29 | 30 | 9.5 | 4.5 | M3 | 10 |
CPE-39 | 8 | 20 | 39 | 40 | 12.5 | 6 | M4 | 14 |
*Insert the shaft to at least the dimension L1. (Note that the shaft cannot go all the way through.)
*The recommended processing tolerance for paired mounting shafts is the h7 class.
[Standard bore diameter]
Model | Standard bore diameters d1, d2 [mm] | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 4 | 5 | 6 | 6.35 | 7 | 8 | 9.525 | 10 | 11 | 12 | 14 | 15 | 16 | 18 | 19 | 20 | |
CPE-19 | ○ | ● | ● | ● | ● | ● | ● | ||||||||||
CPE-29 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||||||
CPE-39 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
*Torque on the CPE-19 with a bore diameter of 3 mm is limited by holding force in the shaft coupling component, so nominal torque is 0.4 N·m and maximum torque is 0.8 N·m.
*Bore diameters between the minimum and maximums shown in the dimensions table are compatible, but bore diameters other than those shown in the above table require a separate bore drilling charge.
CPE Models,CPE Models, CPE Models, CPE Models, CPE Models, CPE Models, CPE Models
/5
Dựa trên đánh giá
Đánh giá
Chưa có đánh giá nào.