Liên hệ
Chúng tôi là nhà phân phối chính thức và duy nhất các sản phẩm của Miki Pulley tại thị trường Việt Nam, Quý khách có nhu cầu về các sản phẩm của Miki Pulley vui lòng liên hệ trực tiếp với chúng tôi để được tư vấn nhanh hơn.
Hotline: 0974190088/Zalo
Email: vuonguoc@gmail.com
ETP-E Plus (N) Types
[Specifications]
Model | Shaft tol. | Rated torque [N・m] |
Rated thrust [N] |
Rated radial load [N] |
Shaft contact pressure [N/mm2] |
Hub contact pressure [N/mm2] |
Tightening torque [N・m] |
Moment of inertia [kg ・m2] |
Mass[kg] | |
---|---|---|---|---|---|---|---|---|---|---|
h7 | k6(j6) | |||||||||
ETP-E-015-N | ● | 46 | 5100 | 500 | 90 | 70 | 7 | 0.042 × 10-3 | 0.16 | |
ETP-E-019-N | ● | ○ | 85 | 7300 | 1000 | 90 | 70 | 7 | 0.063 × 10-3 | 0.20 |
ETP-E-020-N | ● | 110 | 9100 | 1000 | 90 | 70 | 7 | 0.069 × 10-3 | 0.21 | |
ETP-E-022-N | ● | ○ | 130 | 9600 | 1200 | 90 | 70 | 7 | 0.095 × 10-3 | 0.25 |
ETP-E-024-N | ● | ○ | 190 | 13000 | 1400 | 90 | 70 | 7 | 0.109 × 10-3 | 0.26 |
ETP-E-025-N | ● | 230 | 15000 | 1500 | 90 | 70 | 7 | 0.114 × 10-3 | 0.27 | |
ETP-E-028-N | ● | ○ | 280 | 16000 | 1800 | 90 | 70 | 7 | 0.166 × 10-3 | 0.33 |
ETP-E-030-N | ● | 380 | 21000 | 2000 | 90 | 70 | 7 | 0.185 × 10-3 | 0.35 | |
ETP-E-032-N | ● | ○ | 440 | 22000 | 2200 | 90 | 70 | 7 | 0.244 × 10-3 | 0.41 |
ETP-E-035-N | ● | 640 | 30000 | 2500 | 90 | 70 | 7 | 0.317 × 10-3 | 0.47 | |
ETP-E-038-N | ● | ○ | 890 | 38000 | 2800 | 90 | 70 | 24 | 0.756 × 10-3 | 0.83 |
ETP-E-040-N | ● | 1100 | 45000 | 3000 | 90 | 70 | 24 | 0.836 × 10-3 | 0.88 | |
ETP-E-042-N | ● | ○ | 1100 | 43000 | 3200 | 90 | 70 | 24 | 0.959 × 10-3 | 0.95 |
ETP-E-045-N | ● | 1400 | 51000 | 3500 | 90 | 70 | 24 | 1.152 × 10-3 | 1.03 | |
ETP-E-048-N | ● | ○ | 1700 | 57000 | 4000 | 90 | 70 | 24 | 1.430 × 10-3 | 1.09 |
ETP-E-050-N | ● | 1900 | 63000 | 4500 | 90 | 70 | 24 | 1.497 × 10-3 | 1.18 | |
ETP-E-055-N | ● | ○ | 2400 | 71000 | 5000 | 90 | 70 | 24 | 2.130 × 10-3 | 1.46 |
ETP-E-060-N | ● | 3300 | 90000 | 5300 | 90 | 70 | 24 | 3.089 × 10-3 | 1.79 | |
ETP-E-070-N | ● | 5600 | 130000 | 6400 | 90 | 70 | 40 | 6.951×10-3 | 2.93 | |
ETP-E-080-N | ● | 8700 | 180000 | 7500 | 90 | 70 | 40 | 10.02×10-3 | 3.58 | |
ETP-E-090-N | ● | 12000 | 230000 | 8600 | 90 | 70 | 40 | 14.84×10-3 | 4.54 | |
ETP-E-100-N | ● | 17000 | 280000 | 9700 | 90 | 70 | 40 | 21.00×10-3 | 5.51 |
*Sizes with shaft h7(g6・h6) tolerance are denoted with the ● mark. The only sizes that tolerate k6(j6) are those denoted on the chart with an additional mark. Please take this into consideration.
*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.
*The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20℃ .
*ETP-E-070-N to 100-N is a built-to-order product.
[Dimensions]
Model | d | D | D1 | D2 | L | L1 | R | N | M |
---|---|---|---|---|---|---|---|---|---|
ETP-E-015-N | 15 | 18 | 46 | 50 | 23 | 37 | 15.1 | 5 | 1-M10 |
ETP-E-019-N | 19 | 23 | 50.5 | 55 | 25 | 39 | 17.4 | 5 | 1-M10 |
ETP-E-020-N | 20 | 24 | 51.5 | 56 | 27 | 41 | 18 | 5 | 1-M10 |
ETP-E-022-N | 22 | 27 | 55.5 | 61 | 29 | 43 | 19.3 | 5 | 1-M10 |
ETP-E-024-N | 24 | 29 | 57.5 | 63 | 30 | 44 | 20.3 | 5 | 1-M10 |
ETP-E-025-N | 25 | 30 | 58 | 63 | 32 | 46 | 20.8 | 5 | 1-M10 |
ETP-E-028-N | 28 | 34 | 63 | 70 | 34 | 48 | 22.6 | 5 | 1-M10 |
ETP-E-030-N | 30 | 36 | 64.5 | 71 | 36 | 50 | 23.6 | 5 | 1-M10 |
ETP-E-032-N | 32 | 39 | 68.5 | 78 | 38 | 52 | 24.8 | 5 | 1-M10 |
ETP-E-035-N | 35 | 42 | 73 | 86 | 41 | 55 | 26.4 | 5 | 1-M10 |
ETP-E-038-N | 38 | 46 | 84.5 | 92.5 | 47 | 67 | 31 | 8 | 1-M16 |
ETP-E-040-N | 40 | 48 | 86.5 | 94 | 50 | 70 | 32 | 8 | 1-M16 |
ETP-E-042-N | 42 | 51 | 89 | 96.5 | 50 | 70 | 33.2 | 8 | 1-M16 |
ETP-E-045-N | 45 | 54 | 93 | 101 | 52 | 72 | 34.8 | 8 | 1-M16 |
ETP-E-048-N | 48 | 59 | 97 | 104 | 53 | 73 | 36.8 | 8 | 1-M16 |
ETP-E-050-N | 50 | 60 | 98.5 | 106 | 54 | 74 | 37.5 | 8 | 1-M16 |
ETP-E-055-N | 55 | 67 | 106 | 116 | 59 | 79 | 40.5 | 8 | 1-M16 |
ETP-E-060-N | 60 | 73 | 115.5 | 123.5 | 63 | 83 | 43.3 | 8 | 1-M16 |
ETP-E-070-N | 70 | 85 | 135.5 | 150 | 77 | 101 | 50.8 | 10 | 1-M20 |
ETP-E-080-N | 80 | 97 | 145.5 | 160 | 86 | 110 | 56.3 | 10 | 1-M20 |
ETP-E-090-N | 90 | 109 | 155.5 | 169 | 95 | 119 | 61.8 | 10 | 1-M20 |
ETP-E-100-N | 100 | 121 | 166 | 180 | 104 | 128 | 67.3 | 10 | 1-M20 |
*Dimension φD2 is that before tightening the ETP-EXPRESS.
*The nominal diameter of the pressure screw M is equal to the quantity minus the nominal diameter of the screw threads.
ETP-E Plus (C) Types(Easy rustproofing method)*Manufactured upon receipt of orders
[Specifications]
Model | Shaft tol. | Rated torque [N・m] |
Rated thrust [N] |
Rated radial load [N] |
Shaft contact pressure [N/mm2] |
Hub contact pressure [N/mm2] |
Tightening torque [N・m] |
Moment of inertia [kg ・m2] |
Mass[kg] | |
---|---|---|---|---|---|---|---|---|---|---|
h7 | k6(j6) | |||||||||
ETP-E-015-C | ● | 34 | 3800 | 500 | 90 | 70 | 7 | 0.042 × 10-3 | 0.16 | |
ETP-E-019-C | ● | ○ | 63 | 5400 | 1000 | 90 | 70 | 7 | 0.063 × 10-3 | 0.20 |
ETP-E-020-C | ● | 82 | 6800 | 1000 | 90 | 70 | 7 | 0.069 × 10-3 | 0.21 | |
ETP-E-022-C | ● | ○ | 97 | 7200 | 1200 | 90 | 70 | 7 | 0.095 × 10-3 | 0.25 |
ETP-E-024-C | ● | ○ | 142 | 9700 | 1400 | 90 | 70 | 7 | 0.109 × 10-3 | 0.26 |
ETP-E-025-C | ● | 172 | 11200 | 1500 | 90 | 70 | 7 | 0.114 × 10-3 | 0.27 | |
ETP-E-028-C | ● | ○ | 210 | 12000 | 1800 | 90 | 70 | 7 | 0.166 × 10-3 | 0.33 |
ETP-E-030-C | ● | 285 | 15000 | 2000 | 90 | 70 | 7 | 0.185 × 10-3 | 0.35 | |
ETP-E-032-C | ● | ○ | 330 | 16000 | 2200 | 90 | 70 | 7 | 0.244 × 10-3 | 0.41 |
ETP-E-035-C | ● | 480 | 22000 | 2500 | 90 | 70 | 7 | 0.317 × 10-3 | 0.47 | |
ETP-E-038-C | ● | ○ | 667 | 28000 | 2800 | 90 | 70 | 24 | 0.756 × 10-3 | 0.83 |
ETP-E-040-C | ● | 825 | 33000 | 3000 | 90 | 70 | 24 | 0.836 × 10-3 | 0.88 | |
ETP-E-042-C | ● | ○ | 825 | 32000 | 3200 | 90 | 70 | 24 | 0.959 × 10-3 | 0.95 |
ETP-E-045-C | ● | 1050 | 38000 | 3500 | 90 | 70 | 24 | 1.152 × 10-3 | 1.03 | |
ETP-E-048-C | ● | ○ | 1275 | 42000 | 4000 | 90 | 70 | 24 | 1.430 × 10-3 | 1.09 |
ETP-E-050-C | ● | 1425 | 47000 | 4500 | 90 | 70 | 24 | 1.497 × 10-3 | 1.18 | |
ETP-E-055-C | ● | ○ | 1800 | 53000 | 5000 | 90 | 70 | 24 | 2.130 × 10-3 | 1.46 |
ETP-E-060-C | ● | 2475 | 67000 | 5300 | 90 | 70 | 24 | 3.089 × 10-3 | 1.79 |
*Sizes with shaft h7(g6・h6) tolerance are denoted with the ● mark. The only sizes that tolerate k6(j6) are those denoted on the chart with an additional mark. Please take this into consideration.
*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.
*The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20℃ .
[Dimensions]
Model | d | D | D1 | D2 | L | L1 | R | N | M |
---|---|---|---|---|---|---|---|---|---|
ETP-E-015-C | 15 | 18 | 46 | 49 | 23 | 37 | 15.1 | 5 | 1-M10 |
ETP-E-019-C | 19 | 23 | 50.5 | 53 | 25 | 39 | 17.4 | 5 | 1-M10 |
ETP-E-020-C | 20 | 24 | 51.5 | 55 | 27 | 41 | 18 | 5 | 1-M10 |
ETP-E-022-C | 22 | 27 | 55.5 | 61 | 29 | 43 | 19.3 | 5 | 1-M10 |
ETP-E-024-C | 24 | 29 | 57.5 | 63 | 30 | 44 | 20.3 | 5 | 1-M10 |
ETP-E-025-C | 25 | 30 | 58 | 63 | 32 | 46 | 20.8 | 5 | 1-M10 |
ETP-E-028-C | 28 | 34 | 63 | 70 | 34 | 48 | 22.6 | 5 | 1-M10 |
ETP-E-030-C | 30 | 36 | 64.5 | 71 | 36 | 50 | 23.6 | 5 | 1-M10 |
ETP-E-032-C | 32 | 39 | 68.5 | 78 | 38 | 52 | 24.8 | 5 | 1-M10 |
ETP-E-035-C | 35 | 42 | 73 | 86 | 41 | 55 | 26.4 | 5 | 1-M10 |
ETP-E-038-C | 38 | 46 | 84.5 | 90 | 47 | 67 | 31 | 8 | 1-M16 |
ETP-E-040-C | 40 | 48 | 86.5 | 92 | 50 | 70 | 32 | 8 | 1-M16 |
ETP-E-042-C | 42 | 51 | 89 | 94 | 50 | 70 | 33.2 | 8 | 1-M16 |
ETP-E-045-C | 45 | 54 | 93 | 101 | 52 | 72 | 34.8 | 8 | 1-M16 |
ETP-E-048-C | 48 | 59 | 97 | 104 | 53 | 73 | 36.8 | 8 | 1-M16 |
ETP-E-050-C | 50 | 60 | 98.5 | 106 | 54 | 74 | 37.5 | 8 | 1-M16 |
ETP-E-055-C | 55 | 67 | 106 | 116 | 59 | 79 | 40.5 | 8 | 1-M16 |
ETP-E-060-C | 60 | 73 | 115.5 | 133 | 63 | 83 | 43.3 | 8 | 1-M16 |
*Dimension φD2 is that before tightening the ETP-EXPRESS.
*The nominal diameter of the pressure screw M is equal to the quantity minus the nominal diameter of the screw threads.
ETP-E Plus (R) Types(Stainless)
[Specifications]
Model | Shaft tol. | Rated torque [N・m] |
Rated thrust [N] |
Rated radial load [N] |
Shaft contact pressure [N/mm2] |
Hub contact pressure [N/mm2] |
Tightening torque [N・m] |
Moment of inertia [kg ・m2] |
Mass[kg] | |
---|---|---|---|---|---|---|---|---|---|---|
h7 | k6 | |||||||||
ETP-E-015-R | ● | 46 | 5100 | 500 | 90 | 70 | 7 | 0.042×10-3 | 0.16 | |
ETP-E-020-R | ● | 110 | 9100 | 1000 | 90 | 70 | 7 | 0.068×10-3 | 0.21 | |
ETP-E-025-R | ● | 230 | 15000 | 1500 | 90 | 70 | 7 | 0.113×10-3 | 0.27 | |
ETP-E-030-R | ● | 380 | 21000 | 2000 | 90 | 70 | 7 | 0.184×10-3 | 0.35 | |
ETP-E-035-R | ● | 640 | 30000 | 2500 | 90 | 70 | 7 | 0.315×10-3 | 0.47 | |
ETP-E-040-R | ● | 1100 | 45000 | 3000 | 90 | 70 | 24 | 0.826×10-3 | 0.87 | |
ETP-E-045-R | ● | 1400 | 51000 | 3500 | 90 | 70 | 24 | 1.140×10-3 | 1.03 | |
ETP-E-050-R | ● | 1900 | 63000 | 4500 | 90 | 70 | 24 | 1.480×10-3 | 1.18 | |
ETP-E-060-R | ● | 3300 | 90000 | 5300 | 90 | 70 | 24 | 3.065×10-3 | 1.79 |
*Only size with shaft h7(g6・h6) are supported.
*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.
*The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20℃ .
[Dimensions]
Model | d | D | D1 | D2 | L | L1 | R | N | M | r | V[°] |
---|---|---|---|---|---|---|---|---|---|---|---|
ETP-E-015-R | 15 | 18 | 46 | 50 | 23 | 37 | 15.1 | 5 | 1-M10 | 20 | 59 |
ETP-E-020-R | 20 | 24 | 51.5 | 56 | 27 | 41 | 18 | 5 | 1-M10 | 22.5 | 61.5 |
ETP-E-025-R | 25 | 30 | 58 | 63 | 32 | 46 | 20.8 | 5 | 1-M10 | 25.3 | 62 |
ETP-E-030-R | 30 | 36 | 64.5 | 71 | 36 | 50 | 23.6 | 5 | 1-M10 | 28.9 | 63 |
ETP-E-035-R | 35 | 42 | 73 | 86 | 41 | 55 | 26.4 | 5 | 1-M10 | 33.1 | 60.5 |
ETP-E-040-R | 40 | 48 | 86.5 | 94 | 50 | 70 | 32 | 8 | 1-M16 | 37.5 | 59.5 |
ETP-E-045-R | 45 | 54 | 93 | 101 | 52 | 72 | 34.8 | 8 | 1-M16 | 40.8 | 59.5 |
ETP-E-050-R | 50 | 60 | 98.5 | 106 | 54 | 74 | 37.5 | 8 | 1-M16 | 43.3 | 60.5 |
ETP-E-060-R | 60 | 73 | 115.5 | 123.5 | 63 | 83 | 43.3 | 8 | 1-M16 | 51.9 | 59 |
*Dimension φD2 is that before tightening the ETP-EXPRESS.
*The nominal diameter of the pressure screw M is equal to the quantity minus the nominal diameter of the screw threads.
ETP-E Plus Models, ETP-E Plus Models, ETP-E Plus Models, ETP-E Plus Models, ETP-E Plus Models, ETP-E Plus Models, ETP-E Plus Models
/5
Dựa trên đánh giá
Đánh giá
Chưa có đánh giá nào.