Liên hệ
Chúng tôi là nhà phân phối chính thức và duy nhất các sản phẩm của Miki Pulley tại thị trường Việt Nam, Quý khách có nhu cầu về các sản phẩm của Miki Pulley vui lòng liên hệ trực tiếp với chúng tôi để được tư vấn nhanh hơn.
Hotline: 0974190088/Zalo
Email: vuonguoc@gmail.com
AL Models
[Specifications]
Model | Torque | Misalignment | Max. rotation speed [min-1] | Moment of inertia [kg・m2] | Mass [kg] | |||
---|---|---|---|---|---|---|---|---|
Nominal [N・m] | Max. [N・m] | Parallel [mm] | Angular [°] | Axial [mm] | ||||
AL-035 | 0.5 | 1.5 | 0.1 | 0.5 | +0.3 | 18000 | 0.38×10-6 | 0.01 |
AL-050 | 1.5 | 4.5 | 0.2 | 1.0 | ±0.5 | 12000 | 5.10×10-6 | 0.06 |
AL-070 | 3 | 9 | 0.2 | 1.0 | ±0.5 | 9000 | 1.79×10-5 | 0.12 |
AL-075 | 5 | 15 | 0.2 | 1.0 | ±0.5 | 7000 | 5.36×10-5 | 0.21 |
AL-090 | 8 | 24 | 0.3 | 1.0 | ±0.5 | 6000 | 1.15×10-4 | 0.31 |
AL-095 | 10 | 30 | 0.3 | 1.0 | ±0.5 | 6000 | 1.40×10-4 | 0.36 |
AL-100 | 25 | 75 | 0.3 | 1.0 | ±0.7 | 5000 | 4.34×10-4 | 0.78 |
AL-110 | 50 | 150 | 0.3 | 1.0 | ±0.7 | 4000 | 1.43×10-3 | 1.56 |
*Max. rotation speed does not take into account dynamic balance or mounting misalignment.
*The moment of inertia and mass are measured for the pilot bore.
[Dimensions]
couplings
Model | d1, d2 | D | L | L1 | L2 | ||
---|---|---|---|---|---|---|---|
Pilot bore | Min. | Max. | |||||
AL-035 | 4 | 4 | 8 | 16.1 | 20.5 | 6.5 | 7.5*1 |
AL-050 | 5 | 6 | 16 | 27 | 43.2 | 15.5 | 12.2 |
AL-070 | 5 | 6 | 20 | 35 | 49.2 | 18.5 | 12.2 |
AL-075 | 5 | 7 | 26 | 45 | 54.4 | 21.0 | 12.4 |
AL-090 | 5 | 9 | 28 | 54 | 55.0 | 21.0 | 13.0 |
AL-095 | 5 | 9 | 28 | 55 | 61.0 | 24.0 | 13.0 |
AL-100 | 5 | 11 | 36 | 66 | 88.0 | 35.0 | 18.0 |
AL-110 | 5 | 11 | 48 | 85 | 110.0 | 44.0 | 22.0 |
*”Pilot bore” refers to center processing. Minimums and maximums for d1 and d2 are values at the MIKI PULLEY standard hole-drilling standards.
*The value marked *1 leaves a 1 mm space for the thickness of the spider body.
[Dimensions]
Spider
Coupling Model | Spider Model | L2 | R | K |
---|---|---|---|---|
AL-035 | L-035 | 6.5 | ― | ― |
AL-050 | L-050 | 12.2 | ― | ― |
AL-070 | L-070 | 12.2 | ― | ― |
AL-075 | L-075 | 12.4 | 20 | 6.0 |
AL-090 | L-090/095 | 13.0 | 22 | 6.3 |
AL-095 | L-090/095 | 13.0 | 22 | 6.3 |
AL-100 | L-100 | 18.0 | 26 | 6.0 |
AL-110 | L-110 | 22.0 | 30 | 6.0 |
[Standard Hole-drilling Standards]
Models compliant with the old JIS standards (Class 2) | Models compliant with the new JIS standards | Models compliant with the new motor standards | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nominal bore diameter | Bore diameter (d1, d2) | Keyway width (W1, W2) | Keyway height (T1, T2) | Set screw hole (M) | Nominal bore diameter | Bore diameter (d1, d2) | Keyway width (W1, W2) | Keyway height (T1, T2) | Set screw hole (M) | Nominal bore diameter | Bore diameter (d1, d2) | Keyway width (W1, W2) | Keyway height (T1, T2) | Set screw hole (M) |
Tolerance | H7, H8 | E9 | +0.30 | – | Tolerance | H7 | H9 | +0.30 | – | Tolerance | G7, F7 | H9 | +0.30 | – |
6 | 6+0.0180 | – | – | 2-M4 | – | – | – | – | – | – | – | – | – | – |
7 | 7+0.0220 | – | – | 2-M4 | – | – | – | – | – | – | – | – | – | – |
8 | 8+0.0220 | – | – | 2-M4 | – | – | – | – | – | – | – | – | – | – |
9 | 9+0.0220 | – | – | 2-M4 | – | – | – | – | – | – | – | – | – | – |
10 | 10+0.0220 | – | – | 2-M4 | – | – | – | – | – | – | – | – | – | – |
11 | 11+0.0180 | – | – | 2-M4 | – | – | – | – | – | – | – | – | – | – |
12 | 12+0.0180 | 4+0.050+0.020 | 13.5 | 2-M4 | 12H | 12+0.0180 | 4+0.0300 | 13.8 | 2-M4 | – | – | – | – | – |
14 | 14+0.0180 | 5+0.050+0.020 | 16.0 | 2-M4 | 14H | 14+0.0180 | 5+0.0300 | 16.3 | 2-M4 | 14N | 14+0.024+0.006 | 5+0.0300 | 16.3 | 2-M4 |
15 | 15+0.0180 | 5+0.050+0.020 | 17.0 | 2-M4 | 15H | 15+0.0180 | 5+0.0300 | 17.3 | 2-M4 | – | – | – | – | – |
16 | 16+0.0180 | 5+0.050+0.020 | 18.0 | 2-M4 | 16H | 16+0.0180 | 5+0.0300 | 18.3 | 2-M4 | – | – | – | – | – |
17 | 17+0.0180 | 5+0.050+0.020 | 19.0 | 2-M4 | 17H | 17+0.0180 | 5+0.0300 | 19.3 | 2-M4 | – | – | – | – | – |
18 | 18+0.0180 | 5+0.050+0.020 | 20.0 | 2-M4 | 18H | 18+0.0180 | 6+0.0300 | 20.8 | 2-M5 | – | – | – | – | – |
19 | 19+0.0210 | 5+0.050+0.020 | 21.0 | 2-M4 | 19H | 19+0.0210 | 6+0.0300 | 21.8 | 2-M5 | 19N | 19+0.028+0.007 | 6+0.0300 | 21.8 | 2-M5 |
20 | 20+0.0210 | 5+0.050+0.020 | 22.0 | 2-M4 | 20H | 20+0.0210 | 6+0.0300 | 22.8 | 2-M5 | – | – | – | – | – |
22 | 22+0.0210 | 7+0.061+0.025 | 25.0 | 2-M6 | 22H | 22+0.0210 | 6+0.0300 | 24.8 | 2-M5 | – | – | – | – | – |
24 | 24+0.0210 | 7+0.061+0.025 | 27.0 | 2-M6 | 24H | 24+0.0210 | 8+0.0360 | 27.3 | 2-M6 | 24N | 24+0.028+0.007 | 8+0.0360 | 27.3 | 2-M6 |
25 | 25+0.0210 | 7+0.061+0.025 | 28.0 | 2-M6 | 25H | 25+0.0210 | 8+0.0360 | 28.3 | 2-M6 | – | – | – | – | – |
28 | 28+0.0210 | 7+0.061+0.025 | 31.0 | 2-M6 | 28H | 28+0.0210 | 8+0.0360 | 31.3 | 2-M6 | 28N | 28+0.028+0.007 | 8+0.0360 | 31.3 | 2-M6 |
30 | 30+0.0210 | 7+0.061+0.025 | 33.0 | 2-M6 | 30H | 30+0.0210 | 8+0.0360 | 33.3 | 2-M6 | – | – | – | – | – |
32 | 32+0.0250 | 10+0.061+0.025 | 35.5 | 2-M8 | 32H | 32+0.0250 | 10+0.0360 | 35.3 | 2-M8 | – | – | – | – | – |
35 | 35+0.0250 | 10+0.061+0.025 | 38.5 | 2-M8 | 35H | 35+0.0250 | 10+0.0360 | 38.3 | 2-M8 | – | – | – | – | – |
38 | 38+0.0250 | 10+0.061+0.025 | 41.5 | 2-M8 | 38H | 38+0.0250 | 10+0.0360 | 41.3 | 2-M8 | 38N | 38+0.050+0.025 | 10+0.0360 | 41.3 | 2-M8 |
40 | 40+0.0250 | 10+0.061+0.025 | 43.5 | 2-M8 | 40H | 40+0.0250 | 12+0.0430 | 43.3 | 2-M8 | – | – | – | – | – |
42 | 42+0.0250 | 12+0.075+0.032 | 45.5 | 2-M8 | 42H | 42+0.0250 | 12+0.0430 | 45.3 | 2-M8 | 42N | 42+0.050+0.025 | 12+0.0430 | 45.3 | 2-M8 |
45 | 45+0.0250 | 12+0.075+0.032 | 48.5 | 2-M8 | 45H | 45+0.0250 | 14+0.0430 | 48.8 | 2-M10 | – | – | – | – | – |
48 | 48+0.0250 | 12+0.075+0.032 | 51.5 | 2-M8 | 48H | 48+0.0250 | 14+0.0430 | 51.8 | 2-M10 | 48N | 48+0.050+0.025 | 14+0.0430 | 51.8 | 2-M10 |
*The ø11 or below requirement under the new JIS standards and ø11 requirement for the new motor standards are the same as the old JIS standards (class 2).
*For AL-035, the tolerance is +0.05+0 regardless of bore diameter. The set screw size is M3.
[Distance from set screw edge]
Model | AL-035 | AL-050 | AL-070 | AL-075 | AL-090 | AL-095 | AL-100 | AL-110 |
---|---|---|---|---|---|---|---|---|
Distance from set screw edge C [mm] | 3.5 | 7.5 | 9 | 10 | 12 | 12 | 12 | 15 |
SPRFLEX, SPRFLEX, SPRFLEX SPRFLEX, SPRFLEX, SPRFLEX, SPRFLEX, SPRFLEX, SPRFLEX
/5
Dựa trên đánh giá
Đánh giá
Chưa có đánh giá nào.